
IS zinc plus S mini 0.1Kg
お気に入り機能をご利用いただくにはログインが必要です。
閉じる
【order ID】8550839
【basic item number】ZXM01*************************5219
【brand name】Nissin Industry Co., Ltd.
【minimum order quantity】1Can
【packages】12
【manufacturer name】Nissin Industry Co., Ltd.
【Country of origin】Japan
【Weight】160G
[Features]
● TX-free type that does not use toluene or xylene, and does not comply with the PRTR Law.
● Silver finish with 90% zinc dust content in the dry coating film.
●Combined use of zinc powder and zinc flake powder forms a dense coating film, enabling long-term rust prevention.
● Top coating is possible using acrylic copolymer resin.
●Environmentally-friendly high-concentration zinc dust paint that has cleared the PRTR Law, special rules, and organic rules.
●A small amount type that is ideal for partial repairs, and comes with a convenient brush that can be used immediately on site.
[Use]
●Weld marks, cut surfaces, drilling of galvanized steel, zinc sagging, scratches, non-plated areas, etc.
●Alternative to zinc plating for large structures that do not fit in a plating bath or for thin objects that are subject to heat distortion.
● Life-prolonging repair coating of galvanized steel towers, bridges, electrical equipment, etc. that have begun to rust due to aging.
●For long-term rust prevention of steel materials.
●Ideal for work sites where environmental friendliness is required.
【specification】
●Color: Silver
-Capacity (kg): 0.1
-Operating temperature range (°C): Temperature 5°C or higher, humidity 85% or lower
[Specification 2]
Zinc content in dry coating film: 90%
●Drying time: dry to the touch 30 minutes (20℃)
- Painting area: 0.2 square meters
●Recommended film thickness 80μm
● PRTR Law: Not applicable
Specialization rules (specific chemical substance hazard prevention rules): Not applicable
Organic regulations (organic solvent poisoning prevention regulations): Not applicable
Heat-resistant temperature (after application and drying): 180 ° C
●Operating temperature range: Temperature 5℃ or higher (Humidity 85% or lower)
[Material/Finish]
●Main ingredients: zinc powder, zinc flake powder, aluminum paste, acrylic copolymer resin, solvent, additives
[Set contents/accessories]
-
【Note】
●Stir well before use until you can confirm that there is no sediment at the bottom of the can.
●Be sure to shake the container up and down at least 20 times before use.
● TX-free type that does not use toluene or xylene, and does not comply with the PRTR Law.
● Silver finish with 90% zinc dust content in the dry coating film.
●Combined use of zinc powder and zinc flake powder forms a dense coating film, enabling long-term rust prevention.
● Top coating is possible using acrylic copolymer resin.
●Environmentally-friendly high-concentration zinc dust paint that has cleared the PRTR Law, special rules, and organic rules.
●A small amount type that is ideal for partial repairs, and comes with a convenient brush that can be used immediately on site.
[Use]
●Weld marks, cut surfaces, drilling of galvanized steel, zinc sagging, scratches, non-plated areas, etc.
●Alternative to zinc plating for large structures that do not fit in a plating bath or for thin objects that are subject to heat distortion.
● Life-prolonging repair coating of galvanized steel towers, bridges, electrical equipment, etc. that have begun to rust due to aging.
●For long-term rust prevention of steel materials.
●Ideal for work sites where environmental friendliness is required.
【specification】
●Color: Silver
-Capacity (kg): 0.1
-Operating temperature range (°C): Temperature 5°C or higher, humidity 85% or lower
[Specification 2]
Zinc content in dry coating film: 90%
●Drying time: dry to the touch 30 minutes (20℃)
- Painting area: 0.2 square meters
●Recommended film thickness 80μm
● PRTR Law: Not applicable
Specialization rules (specific chemical substance hazard prevention rules): Not applicable
Organic regulations (organic solvent poisoning prevention regulations): Not applicable
Heat-resistant temperature (after application and drying): 180 ° C
●Operating temperature range: Temperature 5℃ or higher (Humidity 85% or lower)
[Material/Finish]
●Main ingredients: zinc powder, zinc flake powder, aluminum paste, acrylic copolymer resin, solvent, additives
[Set contents/accessories]
-
【Note】
●Stir well before use until you can confirm that there is no sediment at the bottom of the can.
●Be sure to shake the container up and down at least 20 times before use.
- regular price
- ¥0
- Selling price
- ¥0
- regular price
-
¥0 - unit price
- /Around
Sale
sold out
tax included
Use the right and left arrows to navigate the slideshow, or swipe left or right if using a mobile device