IS zinc plus L spray 300ml

[Features]
●Environmentally friendly zinc paint.
● TX-free type environmentally friendly zinc dust paint that does not fall under the PRTR law, organic regulations, and special regulations.
●It does not correspond to special rules and organic rules.
●The combination of zinc flake powder and aluminum pigment forms a dense coating film, enabling long-term rust prevention.
● Top coating is possible using acrylic copolymer resin.
● Silver finish with 82% zinc dust content in the dry coating film.

[Use]
●Weld marks, cut surfaces, drilling of galvanized steel, zinc sagging, scratches, non-plated areas, etc.
●Alternative to zinc plating for large structures that do not fit in a plating tank or for thin objects with thermal distortion.
● Life-prolonging repair coating of galvanized steel towers, bridges, electrical equipment, etc. that have begun to rust due to aging
● For long-term rust prevention of steel materials
●Ideal for work sites where environmental friendliness is required.

【specification】
Color: light silver
-Capacity (ml): 300
●Type: Spray
-Operating temperature range (°C): temperature 5°C or higher, humidity 85% or lower

[Specification 2]
Zinc content in dry coating film: 82%
●Drying time: dry to the touch 30 minutes (20℃)
- Painting area: 0.7 square meters
●Recommended film thickness 80μm
● PRTR Law: Not applicable
Specialization rules (specific chemical substance hazard prevention rules): Not applicable
Organic regulations (organic solvent poisoning prevention regulations): Not applicable

[Material/Finish]
●Main ingredients: zinc flake powder, aluminum paste, acrylic copolymer resin, solvent, propellant (DME)

[Set contents/accessories]
-

【Note】
●To prevent clogging, be sure to shake the container up and down 20 times or more before use.
●If there is any left over after use, turn the container upside down for about 2 seconds, blow dry, and then put the cap on before storing.
Please refer to the safety data sheet (SDS) when detailed information is required.