Yamawa Titanium Alloy Tap Through Hole

[Features]
●Only for machines with a fully synchronous lead feed mechanism.
●Screw holes are taken into consideration for shrinkage and cutting heat.
●Smooth discharge of chips by adopting groove shape suitable for titanium alloy.
●Surface treatment is applied to prevent adhesion and wear resistance.
●Appropriately oversized considering the shrinkage of the internal thread.
●High-grade powder HSS with excellent heat resistance and wear resistance is used for the tap material.

[Use]
●For drilling through holes.
●Work Material: Titanium alloy.

【specification】
- Accuracy: P5
- Nominal size: M12
- Pitch (mm): 1.75
●Number of threads:-
-Screw length (mm): 26
- Total length (mm): 82
- Shank diameter (mm): 8.5
-Shank square part (mm): 6.5
- Pilot hole diameter (mm): 10.4
- Processing thread: metric thread
●Number of peaks with bite: 5 peaks
●Surface treatment: Nitriding

[Specification 2]
● Tap grade: P grade

[Material/Finish]
●Powder HSS (HSS-P)

[Set contents/accessories]
-

【Note】
● Do not use this tap on a machine that is not equipped with a fully synchronous lead feed mechanism, as it may cause the female thread to expand or break.