[Features] ● It is a blue-green laser that does not glare with a sharpness of 300. ●Equipped with a navigation function, a remote control rotation function, and a function for switching off, line, and mode that allows automatic alignment by one person. ●Adjustment range when using the fine adjustment knob: ±350 nm at 10 m away. ●It is a gimbal type laser. ● Uses 4 x AA batteries. ●Continuous use time when using 4 vertical lines is about 4 hours in save mode and about 1.5 hours in just mode. *Varies depending on usage conditions and usage. ●Laser light turns off after flashing for 30 seconds. ● Only the line LED blinks. ●Comes with a tripod LEV-150 and receiver RCV-GNAVI.
[Use] ● Laser marking device for standardizing
【specification】 - Vertical (mm): 218 - Width (mm): 130 ●Accuracy: Within ±1mm/7.5m ●Automatic correction range: ±2° ●Type: Green laser Laser safety standard: Class 2M -Perpendicular accuracy: 90°±(2mm/7.5m) -Wavelength: Line 505nm, Point 650nm - Color: green
[Specification 2] Visibility: save mode 150, just mode 300 ●Irradiation line accuracy: Within ±0.81mm at 10m ●Point distance accuracy: Within ±1mm at 7.5m ●Vertical point accuracy: Within ±1mm at 3m ●Left and right alignment accuracy: within ±2 mm at 15 m Dustproof/waterproof performance: Dustproof/waterproof design
[Set contents/accessories] ●Laser marker - Receiver: RCV-GNAVI ●Tripod: ELV-150 - AA alkaline batteries x 6 - AAA alkaline batteries x 4 ● Dedicated carrying case ●Shoulder belt ●Tripod ● Green laser receiver NAVI ● Laser receiver case
【Note】 ●Be sure to check the accuracy before and after use according to the accuracy confirmation method. ●Using the instrument in a broken state may cause erroneous measurements. ●Product specifications are subject to change without notice. ●Please note.
regular price
¥0
Selling price
¥0
regular price
¥0
Salesold out
unit price
/Around
tax included
Use the right and left arrows to navigate the slideshow, or swipe left or right if using a mobile device
Selecting a selection results in a full page refresh.
Press the spacebar and then the arrow keys to select.