Yagami tape heater self-regulating type 200V 28W/M AT10℃

[Features]
●The flexible tape shape enhances the efficiency of tracing work.
●It is a tape-shaped electric heater with a self-regulating function.
●Can also be used in outdoor facilities.
●Can be cut to any length.

[Use]
●For freezing prevention, dew condensation prevention, and process heat insulation.
●For thermal insulation and heating purposes of pipelines and their piping equipment systems (valves, drains, pumps, flanges, etc.), tanks, hoppers, and other facilities.

【specification】
-Power supply (V): 200
- Width (mm): 12
-Length (m): 1
- Thickness (mm): 7.5
●Capacity (W/m at 10℃): 28
A thermostat: none
●Maximum operating temperature (°C): +120°C (at load) +200°C (at no load)
- Output (w/m): 28 (when pipe temperature is 10°C)

[Specification 2]
Temperature control range: none
●Operating temperature range: -40 to 120℃
●Minimum bending radius: 30 mm or more
- Termination set: YSH-T (sold separately)
●Minimum operating temperature: -40℃
- Maximum length of use: 150m
●Available from AC200V to AC240V with standard products

[Material/Finish]
Exterior, insulating material: PFA
-Blade: Tinned copper braid
Heating element: Self-limiting conductive core material
- Busbar: Nickel-plated annealed copper stranded wire

[Set contents/accessories]
-

【Note】
● A separate termination set is required.
●Be sure to use the temperature controller (YD-15N) together.
●Although the self-control function automatically suppresses heat generation, be sure to control the temperature and use it below the maximum operating temperature because it is for high temperatures.
●Be careful when selecting the breaker side because the inrush current will flow more than three times.