YODOGAWA air blow dedicated workbench YMS series (high-spec specification) 3-phase 200V (0.4kW)

[Features]
● Collects and sucks oil and cutting dust that scatter during air blowing on the machine tool side.
●Even if it gets wet, there is little deterioration in performance, and it has a built-in special filter that can be refreshed.
●Equipped with a liquid recovery tank with a drain plug at the bottom of the main unit.
●The main parts and parts of the main body have undergone simple anti-corrosion treatment, and the rubber part is oil-resistant.
●The hood is made of iron that is scratch resistant and has excellent durability.
●Since it is equipped with casters, it can be easily set next to the machine tool, making air blow work more efficient.
●This product is RoHS compliant.
●It is possible to make a special order and support different voltages from 1 unit.

[Use]
●Ideal for preventing scattering during air blow work around machine tools.
●Suitable for workpieces with many machining points such as tapping centers and NC.

【specification】
Power supply (V): three-phase 200
- Output (kW): 0.4
-Dust collection capacity (L): 5
Air volume ([[M3]]/min) (50/60Hz): 9.0/11.0
- Noise level (dB (A)) (50/60Hz): 66/68
● Standard power consumption rate: 5.4 yen/h
●Frequency (Hz): 50/60Hz
Dust removal method: manual
Dust removal method: manual
- Static pressure (kPa) (50/60Hz): 1.13/1.62
-Power cord length (m): 3 (tip crimp terminal only)
-Workbench dimensions (mm) (width x depth x height): 655 x 700 x 390

[Specification 2]
● Front openable hood
●50/60Hz dual use
● Supports different voltages from one unit
●It is necessary to fill in the suction oil type confirmation sheet when ordering.
●Hood opening surface control wind speed (m/s) (50/60Hz) 1.0/1.2

[Material/Finish]
Body: Made of iron plate In-house designed motor
- Filter material: Polyester molded non-woven fabric (Teflon impregnated)

[Set contents/accessories]
●None

【Note】
● Cutting oil with a flash point of 120°C or less and cleaning fluid with a flash point of 135°C or less cannot be sucked.
●It cannot be used even if it turns into a dangerous substance by mixing the work and cutting oil.
●Please contact us if cutting oil may spoil.
●At the time of ordering, it is essential to obtain the manufacturer's designated "suction oil type confirmation sheet". We ask for your cooperation in order to use it safely.