ASADA chisso blow kit

[Features]
●During brazing work, nitrogen is passed through the inside of the pipe to prevent the generation of an oxide film (soot).

[Use]
●For removing water and foreign matter mixed in during piping construction.
●For flushing existing pipes used when installing air conditioners without washing pipes.
●For flushing after cleaning existing pipes using system cleaner CF-20.

【specification】
● Pressure (MPa): 0 to 25 (primary side), 0 to 2.5 (secondary side)
●Secondary side adjustable pressure (MPa): 0 to 1.0
Attached case: Yes

[Specification 2]
●Hose normal pressure: 5.0MPa
● Hose Burst Pressure: 20.0MPa
● Standard flow rate (m3/h): 30
-Adjuster inlet side connection: W22/14 (right) cap nut (P)
-Adjuster exit side connection: 1/4 ASVEL (UNF7/16-20 mountains)
●Hose connection diameter: 1/4 ASVEL (UNF 7/16-20 threads)
- Hose length (m): 3

[Material/Finish]
-

[Set contents/accessories]
Large taper nozzle (1/2, 5/8, 3/4 inch), small taper nozzle (1/4, 3/8 inch), ball valve, 1/4 inch Chisso hose 3m, Chisso blow regulator, Case

【Note】
-