THREE PEAKS wire clamp cutter (with spring) 200mm

[Features]
●The two blades on the left and right cut the wire rope, and the tip hole crimps various clamp tubes (aluminum tubes or oval sleeves).

[Use]
●For fixing and connecting wire ropes.

【specification】
-Cutting capacity (mm) wire: φ1.5
- Total length (mm): 213

[Specification 2]
●Clamp tube crimping capacity: 0.10 to 1.0 mm (WCC-200), 0.27 to 1.5 mm (WCC-250), 1.5 to 2.0 mm (WCC-250-2H)
With kick spring
●With a string mounting hole for fall prevention (WCC-250 only)
With handle lock function
With cutting edge (both ends) adjustment screws

[Material/Finish]
●Vanadium steel

[Set contents/accessories]
-

【Note】
● Never conduct electricity (non-insulated tool).
●Be careful not to cut the end of the wire rope, as there is a risk that the wire rope may get stuck.
●Follow the instructions for cutting the wire rope, crimping the clamp tube, and adjusting the blade.
●Do not use wire ropes or aluminum pipes other than those indicated.
●Do not cut wires that exceed the cutting capacity.