Hitachi High Ceiling LED Lamp Arm Type Special Environment Compatible Moisture Proof/Rain Proof Type

[Features]
●The shock-resistant type can be installed in places subject to a lot of shock and vibration.
●It can be used in factories where there is a lot of vibration, installation on cranes, etc.
●Can be installed in places where dust is present temporarily.

[Use]
●For factories with a lot of vibration.
●For cranes.

【specification】
Brightness (lm): 11500
Power consumption (W): 66.2
Light distribution angle: 110 degrees
- Width (mm): 230
- Depth (mm): 230
● Standard power consumption rate: 1.79 yen/h
- Height (mm): 196
Equivalent mercury lamp (W type): Mercury lamp 250 class
Color rendering index: Ra80
Light source color: Daylight white
-Power supply (V): 100
Light distribution angle (degree): 110

[Specification 2]
Light source color: Daylight white
Light distribution angle: 110 degrees
Rated input voltage: 100-242V
● Average color rendering index: Ra80
-Operating environment temperature: -25°C to 50°C
LED light source life: 60000 hours

[Material/Finish]
-

[Set contents/accessories]
● Fall prevention wire

【Note】
Products evaluated under test conditions of 20G shock resistance (collision speed 25m/min, 50 times each in xyz directions) and vibration resistance 1.5G (amplitude 0.4mm, frequency 30Hz, 10 million times each in xyz directions). is.
Lighting direction: Lighting is possible only directly below (vertical bottom) (tilt lighting is not possible)
●Be sure to use the dedicated fall prevention wire (accessory).