KG worm gear W80SU R1-M-L

[Features]
●The worm is a precision rolling finish.
●Module 0.5, 0.8, 1.0, pressure angle 20° (full tooth).
●Rolled worms have a mirror-like threaded surface, so if they are used in combination with a worm wheel, the life of the worm gear will be longer than with a machined worm.

[Use]
●Used for general industrial machinery, medical equipment, food machinery, etc.

【specification】
Worm twist direction and number of threads (mm): R1
-Module: 0.8
- Reference circle diameter (mm): φ10.4
Face width (mm): 20
- Hole diameter (mm): -
●Twisting direction: R
- Total length (mm): 80
- Article number: 1
-Shape: L
Worm twist direction and number of threads: R1
● Tip circle diameter (mm): φ12
● Mounting screw M: -
●Mounting screw ls:-
- Hub outer diameter (mm): φ8 (h9)
- Hub length (mm): 40 (lhR), 20 (lhL)
● Key groove b2 × t2: -
-Advance angle: 4°24'

[Specification 2]
● Tooth profile: Full tooth
●Pressure angle: 20°

[Material/Finish]
●Stainless steel (SUS304)

[Set contents/accessories]
-

【Note】
● In order to obtain the ideal meshing, when assembling the worm and worm wheel, make sure that they are square.
●Since the friction between the worm and the worm wheel is large, please operate the worm in lubricating oil as much as possible.
●Use the worm and worm wheel with the same twist direction and the same number of threads.
●For the worm shaft and worm wheel shaft, please design the bearings as close to the gears as possible to prevent bending.
●Please note that the axial thrust acting on the worm is considerably large. For axial thrust, please refer to KG Gear Information in the General Catalog.