VESSEL electric screwdriver (Kosoku, with signal output) VE-5000SSOP Lever type Output torque: 0.6 to 2.5 N・m

[Features]
● Kosoku type is twice as fast as conventional models, and you can feel the improvement in work efficiency. (*Comparison with VE-5000.)
● Easy-to-use ergonomic design with a shock-absorbing gel pad for a firm grip.
●Tightening accuracy, efficiency, and maintainability are improved by adopting a slotless/brushless motor.
●Prevents erroneous adjustment with a tamper-proof sleeve.
●Equipped with a signal output line for 3 types of output signals (start, torque up, reverse switch) and 1 type of input signal (electric screwdriver stop) that can control an external device (PLC).

[Use]
●For control of simultaneous use of multiple models on the assembly line, interlocking with peripheral devices, etc.

【specification】
- Output torque (N m): 0.6 to 2.5
- Total length (mm): 290
No-load rotation speed (min [[-1 power]]): 2000
- Compatible screw (mm) small screw: M3.0 to 4.0
- Bit opposite side (mm): 6.35
- Compatible screw (mm) tapping screw: 2.6 to 3.5
Power consumption (W): 150
-Power cord length (m): 2.5

[Specification 2]
●Lever type, with signal output
Power supply: AC type
-Torque adjustment ring: 16 steps x 8 scales
●PSE standard

[Material/Finish]
● PC + elastomer

[Set contents/accessories]
Suspension ring: 1 piece
Tamper-proof sleeve: 1 piece
● Set screw (M3 × 3): 2 pieces
●Hex wrench (H1.5): 1 piece
- 3P2P conversion adapter: 1 piece
●Instruction manual
-Attached bits: M-A14 + 2 x 65H...2

【Note】
● Do not use any device other than PLC to connect to the signal output line.
●Do not connect the + side of the power supply directly to the signal output line.
●Do not drive relays, motors, lamps, etc. directly connected to the signal output line.
●Use the signal input line at 24±10% DC.