VESSEL electric screwdriver (Kosoku type) VE-5000PS Push type Output torque: 0.6 to 2.5 N・m

[Features]
● Kosoku type is twice as fast as conventional models, and you can feel the improvement in work efficiency. (*Comparison with VE-5000.)
● Easy-to-use ergonomic design with a shock-absorbing gel pad for a firm grip.
●Tightening accuracy, efficiency, and maintainability are improved by adopting a slotless/brushless motor.
●Prevents erroneous adjustment with a tamper-proof sleeve.

[Use]
●For control of simultaneous use of multiple models on the assembly line, interlocking with peripheral devices, etc.

【specification】
- Output torque (N m): 0.6 to 2.5
- Total length (mm): 290
No-load rotation speed (min [[-1 power]]): 2000
- Compatible screw (mm) small screw: M3.0 to 4.0
- Bit opposite side (mm): 6.35
- Compatible screw (mm) tapping screw: 2.6 to 3.5
Power consumption (W): 150
-Power cord length (m): 2.5

[Specification 2]
●Push type
Power supply: AC type
-Torque adjustment ring: 16 steps x 8 scales
●PSE standard

[Material/Finish]
● PC + elastomer

[Set contents/accessories]
Suspension ring: 1 piece
Tamper-proof sleeve: 1 piece
● Set screw (M3 × 3): 2 pieces
●Hex wrench (H1.5): 1 piece
- 3P2P conversion adapter: 1 piece
●Instruction manual
-Attached bits: M-A14 + 2 x 65H...2

【Note】
● Read the instruction manual carefully and check that the wiring is correct before turning on the power.
●If the forward/reverse switch of the electric screwdriver is set to the intermediate position, the motor will remain stopped even while the start signal is being output.
●Be sure to stop the motor rotation before operating the forward/reverse switch of the electric screwdriver.
●Please note that a signal may be output when the power of the electric screwdriver is turned on or off.