VESSEL Electric Driver No. VE-4500P-HS4

[Features]
●The grip is easy to hold with a gel pad that absorbs vibrations, making it less tiring. (ergonomic design)
●Maintenance-free, no need to replace carbon brushes.
●Prevents erroneous adjustment with a tamper-proof sleeve.
●Long-life and low-noise brushless motor.

[Use]
●For control of simultaneous use of multiple models on the assembly line, interlocking with peripheral devices, etc.

【specification】
- Output torque (N m): 0.4 to 1.8
- Total length (mm): 250
No-load rotation speed (min [[-1 power]]) strong: HI1000/LO700
No-load rotation speed (min [[-1 power]]): HI: 1000 / LO: 700
- Compatible screw (mm) small screw: M3.0 to 4.0
- Compatible screw (mm) tapping screw: 2.3 to 3.0
Power consumption (W): DC32V 55
Attached bit: D73 [[+]] 1 x 40 / [[+]] 2 x 40 1 each

[Specification 2]
-Torque adjustment ring: 16 steps x 8 scales
●Push start type

[Material/Finish]
● PC + elastomer

[Set contents/accessories]
Tamper-proof sleeve: 1 piece
● Set screw (M3 × 3): 2 pieces
●Hex wrench (H1.5): 1 piece
- 1 3P2P conversion adapter
●AC cable (1.8m): 1 piece
● Controller VCT-45
●Instruction manual

【Note】
● Read the instruction manual carefully and check that the wiring is correct before turning on the power.
● Do not use anything other than a PLC (photocoupler input) for the device connected to the signal output line.
●Do not connect the + side of the power supply directly to the signal output line.
●There will be no current limiting resistor, and the photocoupler will be damaged.
●Do not drive relays, motors, lamps, etc. directly connected to the signal output line.