[Features] ●Since compressed air is used from the compressor in the factory, no vacuum pump is required. ●By using a sub-plate, drilling is possible. ●There is a keyway on the bottom for accurate parallelism and perpendicularity. ●Ideal for processing thin non-magnetic materials (aluminum, stainless steel, plastic, etc.) in machining centers and grinders. ●Equipped with a holding circuit as a standard feature to increase safety even when the air is unstable. ●When the switch is turned off, air is blown backward from the suction hole to prevent relics from being mixed in, so maintenance is almost unnecessary. ●Since there is a screw hole on the bottom, it can be used on a vise by attaching a clamping plate that matches the width of the vise mouth. ●Ideal for processing thin materials in machining, milling, and polishing machines. ●It can be used even in machining where cutting oil is applied. ●There is a stopper plate on the side of the main unit (left side/back side) for positioning and preventing the workpiece from slipping.
[Use] ● For processing thin non-magnetic materials (aluminum, stainless steel, plastic, etc.) in machining, milling, and polishing machines.
【specification】 -Adsorption surface (mm): 350 x 600 - Width (mm): 600 - Depth (mm): 350 ● Maximum adsorption force (kN): 6.4 - Number of suction holes: 2 -Air consumption (L/min): 78 - Parallelism: ±0.01mm -Overall height (mm): 65
[Specification 2] - Top and bottom polished finish
