Pisco urethane tube black 10X6.5 100M

[Features]
●Excellent flexibility.
●Ideal for general pneumatic piping that requires a small bending radius.
●Convenient cut marks are displayed at approximately 500mm intervals when cutting tubes.

[Use]
-

【specification】
- Color: Black
- Outer diameter (mm): 10
Inner diameter (mm): 6.5
- Minimum bending radius (mm): 20
-Usable fluid: air, water (conditions apply)
- Total length (m): 100
- Thickness (mm): 1.75
-Tube outer diameter (φD) (mm): φ10
●Tube inner diameter (φD) (mm): φ6.5
- Minimum mounting radius (mm): 30

[Specification 2]
● Working pressure: 0.8 MPa (at 20°C 65% RH)
Working vacuum pressure: -100kPa
●Operating temperature range: -15 to 60°C (no freezing)
Manufactured in an ISO9001 certified factory
Manufactured in an ISO14001 certified factory

[Material/Finish]
-TPU (thermoplastic polyurethane)

[Set contents/accessories]
-

【Note】
●Do not apply loads such as pulling, twisting, or extreme bending to the tube. It may cause the tube to collapse, burst, or come off.
●Take care not to scratch the tube by rubbing it or tangling it. It may cause the tube to burst.
●Since the burst pressure of the tube decreases as the temperature rises, understand the operating pressure well and consider a safety factor that has sufficient leeway.
●Use a tube with a minimum bending radius or more.
●For tube piping, please allow sufficient leeway in consideration of changes in length.