PISCO Polyurethane Tube Black 4x2.5 50M

[Features]
Great flexibility.
Ideal for general pneumatic piping that requires a small bend radius.
Convenient cut marks are displayed at 500mm intervals when cutting tubes.

[Use]
-

【specification】
Color: Black
Outer diameter (mm): 4
Inner diameter (mm): 2.5
Minimum bending radius (mm): 10
Fluid used: air, water (conditions apply)
Total length (m): 50
Tube outer diameter (φD) (mm): φ4
Tube inner diameter (φD) (mm): φ2.5
Minimum mounting radius (mm): 15
Tube Color: Black

[Specification 2]
Working pressure: 0.8 MPa (at 20°C 65% RH)
Working vacuum pressure: -100kPa
Operating temperature range: -15 to 60°C (no freezing)

[Material/Finish]
TPU

[Set contents/accessories]
-

【caution】
Do not apply loads such as pulling, twisting, or extreme bending to the tube. It may cause the tube to collapse, burst, or come off.
Avoid scratching the tube by rubbing or tangling it. It may cause the tube to burst.
The burst pressure of the tube decreases as the temperature rises, so please understand the working pressure well and consider a safety margin with sufficient margin.
Use the tube with the minimum bending radius or more.
Take into account changes in length, etc., for the piping of the tube, and make sure there is enough room.