TRUSCO drill screw thin flat for sheet metal SUS 5X19 29 pieces

[Features]- A drill screw with an ultra-thin head of 0.9 mm, so even if it is used in places where there is no counterbore, the head will not protrude. ●Unevenness is less likely to occur even if another attachment is fastened on top of the screw.

[Applications] ● Fastening thin steel plates and steel frames, etc.

[Specifications] - Nominal dimension (mm) D: 10 - Maximum applicable board thickness (mm): 3.2 - Compatible screwdriver: Phillips No. 2 - Nominal dimension (mm) L1: 7 - Head diameter (mm): 10 - Nominal Dimensions (mm) H: 0.9 Head thickness (mm): 0.9 Nominal dimensions (mm) d x L: 5 x 19

[Specification 2]
-

[Material/Finish] ●Stainless steel (SUS410) ●Surface treatment: Passipate treatment

[Set contents/accessories]
-

[Caution] ● When fastening wooden materials or if there is a gap between the base steel plate and the upper steel plate, the plate floating phenomenon may occur and the tip of the screw may break. ●It is not suitable for attaching metal fittings with pilot holes that are 2mm or thicker, such as angles and flat bars.