Yanase One-touch shaft Toppo 10 (13) X10 x 3 #240

[Features]
●A special flap wheel wraps the abrasive cloth around it, and when it rotates, the centrifugal force spreads the abrasive cloth out.
●The abrasive cloth spreads due to centrifugal force, so it fits well when pressed against the workpiece.
●This flap wheel is capless on both sides and does not use metal fittings, making it easy to use and less likely to scratch the workpiece.
●The shaft and flap can be removed with one touch, reducing waste.

[Applications]
●Polishing metal surfaces such as iron, stainless steel, and aluminum.
●It is possible to polish the inside of pipes and round holes to fit them. (Applicable when the hole diameter is larger than the diameter when stationary and smaller than the diameter when rotating)
●Removing burrs, removing rust, polishing before painting, adding hairlines, etc.
●Tool used: Straight grinder.

【specification】
Shaft diameter (mm): 3
Shaft length (mm): 30
Grain size (#): 240
Outer diameter (mm): 10
Number of blades: Approx. 24
● Maximum operating speed (rpm): 20000
Width (mm): 10

[Specification 2]
-

[Material/Finish]
Shaft: Steel

[Set contents/accessories]
● Comes with mandrels (2 per 10)

【Note】
●Do not use the product at or above the maximum operating speed.
●Always wear protective gear such as a hard hat and safety glasses when working.