Nozzle with TRUSCO magnet for supplying cutting fluid

[Features]
●A strong magnet of 800N can be easily installed in any position.
●The angle and direction of the nozzle can be freely determined.
●Additional screw hole Rc1/4 is drilled, so even two nozzles can be used.
●There are two independent screw holes.

[Use]
●For lubrication of cutting fluid.

【specification】
- Number of nozzles: 1
- Hole diameter: 1/4
- Nozzle length (mm): 320
-Cutting fluid inlet (mm): 13.5
-Valve: Yes
- Adsorption power (N): 800
●Maximum fluid pressure (kg/[[CM]]): 3.46
Applicable fluids: water-soluble cutting fluid, oil-based cutting fluid
Working liquid pressure: 2 to 3.4 bar

[Specification 2]
-

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-