[Features] ●A dedicated vacuum pump is not required due to the use of a vacuum ejector. ●It can be used simply by inserting the one-touch fitting tube from the compressor in the factory. ●Because of air adsorption, non-magnetic materials such as stainless steel, aluminum, and resin can also be used. ●Adsorption power can be adjusted with a pressure reducing valve, which cuts air consumption by 20%. ●A small amount of air is constantly released from the vacuum hole when the switch is OFF, preventing foreign matter from entering the circuit. ●A base mounting hole is provided for mounting in parallel. ●Equipped with a side plate for positioning and preventing misalignment of workpieces.
[Use] ●The air from the compressor instantly absorbs and fixes the workpiece. ●350×600
【specification】 -Adsorption surface (mm): 350 x 600 - Width (mm): 350 - Depth (mm): 600 ● Maximum adsorption force (kN): 6.16 - Number of suction holes: 1 -Air consumption (L/min): 100 - Parallelism: 0.01mm/100mm -Overall height (mm): 65
[Specification 2] - Top and bottom polished finish - There is a mounting groove on the side of the main body, so please fix it with an optional solid clamp: SC1400 (M14), SC1600 (M16), SC1800 (M18).
