YODOGAWA Welding fume dust collector (timer type pulse jet dust removal) SET 3-phase 200V (2.2kW/IE3 motor) 60Hz

[Features]
This product is equipped with a top-runner motor compatible with IE3 standards.
The timer-type pulse jet dust removal always provides optimum performance.
Adopting a special metal porous baffle, it is possible to sediment spatters and sparks and suck them safely.
The main unit's pulse jet dust removal is designed to work effectively, and a filter that can handle various types of fume collection is used.
No tools are required, and a simple UNIT system enables short-time maintenance.
Custom orders and different voltages are available from 1 unit.
Custom orders and different voltages are available from 1 unit.

[Use]
For suction of spatter (sparks) and welding fumes generated during welding.
For various welding work sites.

【specification】
Power supply (V): Three-phase 200
Output (kW): 2.2
Dust collection capacity (L): 39
Air volume ([[M3]]/min) (50/60Hz): -/32
Noise level (dB(A)) (50/60Hz): -/69
Suction port diameter (mm): 175
Standard power consumption rate: 29.7 yen/h
Power cord length (m): 3 (tip crimp terminal only)
Maximum static pressure (kPa) (50/60Hz): 2.75/3.24
Dust removal method: Pulse jet type (timer type)

[Specification 2]
IE3 motor type
Equipped with a pretreatment box to minimize the suction of spatter and sparks to the main body.
Number of installed filters (books): 6
Supports different voltages from one unit

[Material/Finish]
Body: Made of iron plate In-house designed motor
Filter material: Polyester molded non-woven fabric (Teflon laminate)

[Set contents/accessories]
-

【Note】
-