YODOGAWA Welding fume dust collector (timer type pulse jet dust removal) SET 3-phase 200V (2.2kW) 50Hz 50Hz

[Features]
Adopting a special metal porous baffle, it is possible to sediment spatters and sparks and suck them safely.
The timer-type pulse jet dust removal always provides optimum performance.
The main unit's pulse jet dust removal is designed to work effectively, and a filter that can handle various types of fume collection is used.
Maintenance is easy as it is UNIT type and requires no tools.
RoHS compliant.
Equipped with a high-performance non-woven fabric filter developed for collecting welding fumes with a very wide filtration area, it exhibits optimal dust collection capacity.
Short maintenance time has been achieved with a simple UNIT method that does not require tools.
Custom orders and different voltages are available from 1 unit.

[Use]
For suction of spatter (sparks) and welding fumes generated during welding.
For various welding work sites.

【specification】
Power supply (V): Three-phase 200
Output (kW): 2.2
Dust collection capacity (L): 39
Air volume ([[M3]]/min) (50/60Hz): 28/-
Noise level (dB(A)) (50/60Hz): 69/-
Suction port diameter (mm): 175
Standard power consumption rate: 29.7 yen/h
Power cord length (m): 3 (tip crimp terminal only)
Maximum static pressure (kPa) (50/60Hz): 2.75/3.24
Dust removal method: Pulse jet type (timer type)

[Specification 2]
Uses special metal porous baffle
Filter type: Molded non-woven cylindrical filter (for fume)
Supports different voltages from one unit
Compressed air pressure used: 0.49 to 0.69 MPa

[Material/Finish]
Body: Made of iron plate In-house designed motor
Filter material: Polyester molded non-woven fabric (Teflon laminate)

[Set contents/accessories]
-

【Note】
-