YODOGAWA Welding fume dust collector (small differential pressure sensing type pulse jet dust removal) SET-TEC 3-phase 200V (1.5kW/IE3 motor) 50Hz

[Features]
This product is equipped with a top-runner motor compatible with IE3 standards.
A dust collector developed exclusively for welding fumes. Equipped with a pulse jet dust removal function, it always exhibits optimum performance. Adopting a special metal porous baffle, it is possible to sediment spatters and sparks and suck them safely.
The fine differential pressure sensor type pulse jet dust removal always demonstrates the optimum performance.
It is a dedicated machine for 50Hz and 60Hz.
It is a RoHS directive compliant product.
Equipped with a high-performance non-woven fabric filter developed for collecting welding fumes with a very wide filtration area, it exhibits optimal dust collection capacity.
Short maintenance time has been achieved with a simple UNIT method that does not require tools.
Custom orders and different voltages are available from 1 unit.

[Use]
For suction of spatter (sparks) and welding fumes generated during welding.

【specification】
Power supply (V): Three-phase 200
Output (kW): 1.5
Dust collection capacity (L): 27
Air volume ([[M3]]/min) (50/60Hz): 20/-
Noise level (dB(A)) (50/60Hz): 67/-
Suction port diameter (mm): 150
Standard power consumption rate: 20.25 yen/h
Power cord length (m): 3 (tip crimp terminal only)
Maximum static pressure (kPa) (50/60Hz): 2.35/2.75
Dust removal method: Pulse jet type (small differential pressure sensing type)

[Specification 2]
Uses special metal porous baffle
Equipped with a pretreatment box to minimize the suction of spatter and sparks to the main body.
Number of installed filters (books): 4
Compressed air pressure (Mpa): 0.49 to 0.69
Supports different voltages from one unit
Equipped with IE3 motor

[Material/Finish]
Body: Made of iron plate In-house designed motor
Filter material: Polyester molded non-woven fabric (Teflon laminate)

[Set contents/accessories]
-

【Note】
-