STEINEL silicon belt heater 100V150W1500L SBH115

[Features] ● Because one side is flat, a uniform heat generation surface can be obtained, providing excellent heating characteristics. ●It can be manufactured with a wide range of specifications, from low wattage (W/m) to high wattage (W/m), which is the heat resistance limit of the covering material. ●This product was developed for heat retention and heating in the low to medium temperature range and has a wide range of uses. ●Capacity per 1m: 100W/m

[Use] ●For heating pipes.

[Specifications] ● Power supply (V): Single phase 100 ● Width (mm): 15 ● Length (m): 1.5 ● Thickness (mm): 4.5 ● Capacity (W): 150 ● Operating temperature range (°C): -50 to 180 ●Thermostat: None ●Temperature adjustment range: None

[Specification 2] ●Operating temperature: -50°C to 180°C (The operating temperature is only a guideline. The temperature that can be used varies depending on the actual operating environment.) ●Insulation resistance: 100MΩ or more at 500 DC ●Insulation voltage: 150V or less Things AC1000V/1 minute Things over 150V AC1500V/1 minute Connection tensile strength: 30N (3.06kgf)

[Material/Finish] Heat-resistant silicone rubber

[Set contents/accessories]
-

[Caution] ● This product is for industrial use. ●For indoor use only. The heater is not waterproof, so do not splash water or other liquids on the heater. ●When the heater is installed, heat transfer coefficient will decrease if the degree of adhesion to the object to be heated is poor. It may cause early disconnection or abnormal heating. ●Be careful not to bend the heater forcibly or cause cracks. Also, do not bend the lead connection part (mold part) at a sharp angle or crush it. It may cause electric shock and early disconnection.