YAHATA rolled slide screw with PPS nut φ6XL9X200L

[Features]● The resin nut of the rolled sliding screw uses PPS as a base material, and a special resin with added solid lubricant (fluorine resin, etc.) is used to improve sliding characteristics. ●Compared to polypropylene, nylon, and polyacetal, this material has superior slidability, heat resistance, and water absorption. ●Compared to ball screws, it produces less noise and slides more lightly with lower torque than trapezoidal screws. ●Lower noise than ball screws, and lower torque than trapezoidal screws for light sliding.

[Use]
-

[Specifications] - Lead (mm): 9 - Nominal diameter D1 (mm): 6 - Total length (mm): 200

[Specification 2] ● Initial lead error ±0.21/300 mm (reference temperature 25°C) ● Bend accuracy within 0.16 mm

[Material/Finish] - Screw shaft: SUS304 - Nut: Sliding PPS resin

[Set contents/accessories] - PPS nut x 1

[Caution] ●Position reproducibility may change due to friction during use or replacement of parts during maintenance. ●Molybdenum-based and silicon-based greases cannot be used when using grease. ●Never use the nut as it will interfere with the nut. ●Sliding characteristics are based on a temperature of 25°C. Characteristics may change due to temperature difference. ●As the nut is made of PPS base material, it may crack or deform due to impact or excessive tightening.