FUKUHARA PSD Drain Destroyer 8

[Features] ● Treats drain water to 5ppm or less clean water with excellent functionality and economy. (Complies with the emission standards of the Water Pollution Control Law) ●It is a very simple structure that does not use electrical equipment. ●Emulsion (emulsified oil) is treated only with a special filter, and sludge (deposits) is not generated. ●Because a special filter is used, the effect does not change even if the oil content of the drain fluctuates.

[Use] ●The oil contained in the drain discharged from the oil-filled air compressor is reduced to 5 PPm or less of clean water (cleared by the Water Pollution Control Law).

[Specifications] ● Applicable compressor (screw) (kW): 8 or less ● Applicable compressor (reciprocating) (kW): 5.5 or less ● Post-treatment oil concentration (ppm): 5 or less ● Depth (mm): 310 ● Height (mm) ): 438 ● Maximum processing capacity (L/h): 5 ● Working pressure (MPa): 1.5 ● Port size: Rc1/4 ● Width (mm): 376 ● Fluid temperature: 2 to 50°C (drain must not freeze ) Fluid used: Compressor drain, etc. Drain discharge amount ([[CM 3]]/time): - Overall length (mm): - W x D x H (mm): 376 x 310 x 438

[Specification 2] ● Drain processing method: Filter method (gravity fall) ● Inlet/outlet diameter: Rc1/4 ● Processing capacity: 5 L/h (PSD8, 15), 10 L/h (PSD22) ● Connectable objects: Compressor, dryer , air tank, air filter

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-