PULSARLUBE PLC480 (interval type)

[Features]
●Trouble information (pipe clogging, no remaining grease, etc.) can be remotely monitored by the PLC system.
●Automatic lubrication is possible by ON/OFF program of PLC signal.
●There is a warning function such as an alarm and a buzzer when a lubrication problem occurs. (PLC, DC converter, PATLITE must be purchased separately.)
● Piping up to 6m can be installed during multi lubrication with up to 8 ports. (For grease #1)
● Lubrication cycle is lubrication in 6 mode setting by PLC program. (* 6 mode is a mode that discharges 6 times in succession)

[Use]
● For maintenance of bearings (bearings, etc.).

【specification】
- Grease capacity (cc): 480
- Refueling cycle: 0.34cc x 1 to 6 times
- Height (mm): 780
-Width (mm): φ91

[Specification 2]
●Ambient temperature: -20 to 60℃
●Output current: Max 1A
●PLC DC12V/DC24V
● Mounting screw size: PT3/8
Working pressure: normal 30kgf/[[CM]] (maximum 60kgf/[[CM]])
●Power supply voltage 9 to 36V DC only (no built-in battery)
●No container included

[Material/Finish]
●Plastic
●Iron

[Set contents/accessories]
- Connection cable (3m)

【Note】
●For PLC/MON and PLC/INT, it is necessary to select a model depending on whether the PLC controller model is PNP or NPN.
● Wiring to the lubricator body is required.
●A container is not included, so a grease pack or an empty container must be purchased separately.
●Select NPN or PNP for electrical connection.
●Grease pack is not included.