Hoshin water stop ball long type 100-200 with bypass

[Features]
●It expands with air and adheres to the inside of the pipe to stop water.
●It has excellent elasticity and can be used with pipe diameters of various sizes.
●A total of 22 types for pipe diameters from 70mm to 1800mm.
●Bypass type can be used for various tests.

[Use]
●For temporary water stoppage during cleaning, dredging, various investigations, tests, and repair work inside pipes.

【specification】
- Nominal diameter (mm): 100-200
- Length (mm): 655
- Minimum to maximum pipe diameter (mm): 100 to 200
● Maximum allowable back pressure (MPa): 0.13 to 0.22
● Maximum allowable back pressure air (MPa): 0.13 to 0.22
- Diameter (mm): 92
Body injection air pressure (MPa): 0.25

[Specification 2]
Injection fitting: special socket
● Reinforced fiber reinforced
●Long type
●With bypass

[Material/Finish]
● SBR synthetic rubber (styrene-butadiene rubber)

[Set contents/accessories]
-

【Note】
●Use an accurate pressure gauge and inject the specified air pressure little by little.
●When using a compressor, set the pressure regulator to the specified pressure, open the valve slowly, and inject air little by little.
●Injecting air all at once or exceeding the specified air pressure may damage the pressure gauge or deform or rupture the water stop ball, leading to a serious accident.
●Even if it is deformed or damaged, it cannot be repaired.