SURE hot air processing machine plastic jet lightweight type

[Features]
●Professional metal body.
-It is lighter than the standard type (PJ-206A1) by adopting a DC motor and changing the body structure.
- By placing the power switch on the back of the handle, you can switch the switch with one hand.

[Use]
● Shrinkage of heat-shrink tubing.
●Shrink film packaging.
● Deburring of molded products.
● Peel off the adhesive seal.
● Bending processing of resin such as PVC pipes.
Accelerates the drying of paint such as thermosetting putty and bumper repair.
● Remove parts from the board.
● Welding with PVC rods.
●Thermal welding of vinyl chloride sheets.

【specification】
- Total length (mm): 255
Power supply (V): AC100
Power consumption (W): 600
●Applications: Shrink wrapping, heat-shrinkable tubing, label removal
- Width (mm): 75
-Switch: Slide type 3-stage switching
- Height (mm): 189
- Length (mm): 207
-Power cord length (m): 3
● Hot air temperature (℃): 450
-Wind speed (m/min): 400
Air volume ([[M3]]/min): 0.125

[Specification 2]
● Hot air temperature: 450℃ (10mm from the tip)
●Air volume: 0.125 (M3)/min
●Wind speed: 400m/min
Power supply (V): AC100
Power consumption (W): 600
- Width (mm): 207
- Height (mm): 189
- Depth (mm): 75
- Switch: 3-stage switching (hot air / fan / off)
●Mass: 595g

[Material/Finish]
-Body case: SPCE + nickel plating
- Handle, case lid, filter case: ABS resin
●Heater: Ceramic bobbin + NCHW
-Fan: PP resin

[Set contents/accessories]
● R-type stand, filter

【Note】
●When turning off the power, set the power switch to "fan" and cool the main unit for about 5 minutes.
●If you turn off the power switch immediately after work, the life of the heater may be significantly shortened and damage to each part will be significantly accelerated.