SANWA high-accuracy PC-connectable digital multimeter

[Features]
●The main unit has a data memory (logging) function.
●Corresponds to true rms values (AC).
● It is a dual display display.
●Peak hold function.
●MAX/MIN recording function.
● Data can be transferred to a PC (separately sold dedicated cable (KB-USB7) and software (PCLink7) are required).

[Use]
●For research and development.
●For electronic work.
●For electrical work and equipment maintenance.

【specification】
DC voltage (V): 999.9
- AC voltage (V): 999.9
- DC current (A): 10
- Alternating current (A): 10
- Resistance (Ω): 60M
-Capacitor capacity: (F) 25.00m
Continuity check: Buzzer at 20Ω to 300Ω
Diode test: Open voltage about 3.5V
●Duty ratio: 0 to 100.0%
Temperature (°C) -50 to 1000
● Resistance (Ω) 60.00M
-Frequency (Hz): 15-50k
●Capacitor: 25mF

[Specification 2]
- Maximum display: 9999 count
-Width x depth x height: 86 x 52 x 184mm
Battery life: 100 hours
-Detection method: True RMS rectification (RMS)
-Power supply: 9V alkaline battery (6LF22) x 1 (included)

[Material/Finish]
-

[Set contents/accessories]
●Instruction manual
●Test lead TL-23a
●Holster H-700
● K-type thermocouple temperature sensor K-250PC

【Note】
● Do not use if the main unit or test leads are damaged.
● Do not hold the test pin side of the test probe by its collar during measurement.
●Connect the ground side (black test lead) first, and then connect the energized side (red test lead). When disconnecting, disconnect the energized side first.
●Do not switch to other functions or ranges or replace test lead plugs with other measurement terminals during measurement.
●Use a fuse of the specified shape and rating.