SANWA true RMS compatible digital multimeter PC connection type

[Features] ● Capturing function and MAX/MIN recording function. ● The liquid crystal part is equipped with a backlight. ●Compliant with the new IEC. ●Temperature measurement is also possible. ● True RMS value can be measured (AC only). ●Dual display of voltage and frequency is possible. ●Minimum resolution is 0.01mV (ACV/DCV only). ●Data can be transferred to a PC using the separately sold dedicated software and an optical link USB cable. ●International safety standard CAT.[3] 600V compliant ●Supports Kosoku response bar graphs.

[Use] ● For research and development. ●For electronic work. ●For electrical work and equipment maintenance.

[Specifications] ● Depth (mm): 52 ● AC voltage (V): 999.9 ● AC current (A): 10 ● Height (mm): 184 ● DC voltage (V): 999.9 ● DC current (A): 10 ●Resistance (Ω): 60M ●Power supply: Laminated type 9V (6F22) x 1 (included) ●Width (mm): 86 ●Frequency (Hz): 15 to 50.00k ●Capacitor capacity (F): 25.00m ●Logic ●Frequency (Hz): 5 to 1.000M ●Temperature (C): -50 to 1000° ●Continuity check: Buzzer sound at 20 to 300Ω ●Non-contact voltage detection function (ACV): 20 to 440 ●Diode test ●Duty ratio

[Specification 2] ● Detection method: true root mean square (RMS) ● Conforms to international safety standard CAT.[3] 600 V ● Battery life 60 hours

[Material/Finish]
-

[Set Contents/Accessories] ●Test lead ●Holster ●Temperature sensor ●Instruction manual ●Instruction manual ●Test lead TL-23a ●Holster H-700 ●K-type thermocouple temperature sensor K-250PC

[Caution] ● Do not use if the main unit or test leads are damaged. ● Do not hold the test pin side of the test probe by its collar during measurement. ●Connect the ground side (black test lead) first, and then connect the energized side (red test lead). When disconnecting, disconnect the energized side first. ●Do not switch to other functions or ranges or replace test lead plugs with other measurement terminals during measurement. ●Use a fuse of the specified shape and rating.