SANWA digital multimeter PC connection type

[Features]●Dual display of voltage and frequency is possible. ●Data can be transferred to a PC using the separately sold dedicated software and an optical link USB cable. ●Compliant with the new IEC. ●Minimum resolution is 0.01mV (ACV/DCV only). ●Compliant with CE. ●International safety standard CAT.[3] 600V compliant ●Supports Kosoku response bar graphs. - Maximum display: 9999 count

[Use] ● For research and development. ●For electronic work. ●For electrical work and equipment maintenance.

[Specifications] ● Depth (mm): 52 ● AC voltage (V): 999.9 ● AC current (A): 10 ● Height (mm): 184 ● DC voltage (V): 999.9 ● DC current (A): 10 ● Resistance (Ω): 60M ● Power supply: Stacked type 9V (6F22) x 1 (included) ● Width (mm): 86 ● Width x depth x height: 86 x 52 x 184 mm ● Frequency (Hz): 15.00 ~ 50.00k Capacitance: (F) 25.00m Continuity check: Buzzer at 20Ω to 300Ω Duty ratio: 0 to 100.0% Diode test

[Specification 2] ●Detection method: Mean value rectification (MEAN) ●Conforms to international safety standard CAT.[3] 600V ●Battery life 60 hours ●Temperature measurement possible

[Material/Finish]
-

[Set Contents/Accessories] ●Test lead ●Holster ●Instruction manual ●Instruction manual ●Test lead TL-23a ●Holster H-700

[Caution] ● Do not use if the main unit or test leads are damaged. ● Do not hold the test pin side of the test probe by its collar during measurement. ●Connect the ground side (black test lead) first, and then connect the energized side (red test lead). When disconnecting, disconnect the energized side first. ●Do not switch to other functions or ranges or replace test lead plugs with other measurement terminals during measurement. ●Use a fuse of the specified shape and rating.