KKK chuck mate "hydraulic" 5 inch 14 mm

[Features]
●Soft jaw forming setup takes less than 1 minute. Machining is completed in a short time. Even an inexperienced person can center with one touch. Core runout accuracy is within 10 microns.
●Measurement can be done with calipers while wearing without interfering with permanent tooling.
●How to use: Open the chuck, insert 3 chuck mate stop pins into the attachment holes of the soft jaws, and tighten the chuck. In the case of a tension chuck, the operation is reversed.

[Use]
●For holders for forming soft jaws during chuck work.

【specification】
- Applicable chuck outer diameter (inch): 5
- Pin diameter (mm): 13.5
- Outer diameter (mm): 145
- Maximum processing dimension (mm): 65

[Specification 2]
-

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-