KKK chuck mate "hydraulic" 12 inch 22 mm

[Features]
●Soft jaw forming setup takes less than 1 minute. Machining is completed in a short time. Even an inexperienced person can center with one touch. Core runout accuracy is within 10 microns.
●Measurement can be done with calipers while wearing without interfering with permanent tooling.
●How to use: Just open the chuck, put 3 chuck mate stop pins into the attachment holes of the soft jaws, and tighten the chuck. In the case of a tension chuck, the operation is reversed.

[Use]
●For holders for forming soft jaws during chuck work.

【specification】
- Compatible chuck outer diameter (inch): 12
- Pin diameter (mm): 21.5
- Outer diameter (mm): 318
- Maximum processing dimension (mm): 186

[Specification 2]
-

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-