Pisco nylon tube black 4X2.5mm 100M

[Features] ●Excellent pressure resistance, abrasion resistance, and cold resistance. ●It is resistant to bending fatigue and can be used stably for a long time. ●Convenient cut marks are displayed at approximately 500mm intervals when cutting tubes.

[Use]
-

[Specifications] ● Color: Black ● Outer diameter (mm): 4 ● Inner diameter (mm): 2.5 ● Minimum bending radius (mm): 10 ● Total length (m): 100 ● Working fluid: air, water (conditions apply), Thermal catalyst oil (with conditions) Wall thickness (mm): 0.75 Tube outer diameter (φD) (mm): φ4 Tube inner diameter (φD) (mm): φ2.5 Minimum mounting radius (mm): 15

[Specification 2] Working pressure: 1.5 MPa (at 20°C 65% RH) Working vacuum pressure: -100 kPa Working temperature range: -15 to 90°C (no freezing) Made in an ISO14001 certified factory ISO9001 certified factory made

[Material/Finish] Nylon (PA12)

[Set contents/accessories]
-

[Caution] ● Do not apply loads such as pulling, twisting, or extreme bending to the tube. It may cause the tube to collapse, burst, or come off. ●Take care not to scratch the tube by rubbing it or tangling it. It may cause the tube to burst. ●Because the burst pressure of the tube decreases as the temperature rises, understand the working pressure well and consider a safety factor with a sufficient margin. ●Use a tube with a minimum bending radius or more. ●For tube piping, please allow sufficient leeway in consideration of changes in length.