NISHIGAKI Laboratory X26

[Features]● Just insert the chuck into the blade edge setting device and set the blade edge. ●Blade edge can be polished simply by inserting it into the blade edge polishing port. ● Thinning polishing can be performed simply by inserting it into the thinning polishing port. ●The thinning width can be adjusted with the adjustment dial. ●A whetstone (N-874-1) with a tip angle of 118° is set as standard. ●There is also a whetstone (N-874-2) with a tip angle of 135° (sold separately). ●You can attach a separately sold 135-degree whetstone.

[Use] ● For re-polishing straight drills for iron work.

[Specifications] ● Motor rotation speed (rpm): 3400 ● Grindable size (mm): 7 to 26 ● Width (mm): 352 ● Depth (mm): 348 ● Height (mm): 365 ● Power cord length (m): 2.8 No-load rotation speed (min [[-1 power]]): 3400

[Specification 2] ●Power supply: Single-phase 100V ●Power cord length: 2.8m ●Rated motor power consumption: 750W ●Rated motor time: 15 minutes ●Blade angle: 118° ●Thinning shape (type): X

[Material/Finish] ●Body (SPHC) ●Inlet (SS400) ●Chuck (SS400)

[Set Contents/Accessories] ● Chuck ● Collet: 5 pieces ● Instruction manual

[Caution] ● Carbide drills and concrete drills cannot be ground.