NISHIGAKI Ken Candle Type for Carbide

[Features] ● Carbide spot drills can be polished into a candle shape. ●Grinding can be done simply by setting the drill to the chuck and inserting it. ● Thinning polishing is possible. ●Can be chamfered and polished. ● Carbide spot cutters can be re-polished. ●Just set the blade edge by inserting the chuck into the blade edge setting device. ●Blade edge can be polished simply by inserting it into the blade edge polishing port. ● Thinning polishing can be performed simply by inserting it into the thinning polishing port. ● Chamfering can also be polished.

[Applications] ● For regrinding carbide drills and carbide spot cutters. For regrinding carbide spot cutters

[Specifications] ●Motor rotation speed (rpm): 20000 ●Polishable size (mm): straight shaft 3.0 to 13 ●Width (mm): 180 ●Depth (mm): 175 ●Height (mm): 195 ●Whetstone material : Diamond #170 ●Whetstone diameter (mm): 48 ●Power supply (V): Single phase 100 ●Power cord length (m): 1.7 ●Rated current consumption (A): 1.3

[Specification 2] ● Power supply: Single-phase 100 V ● Power cord length: 1.7 m ● Rated motor power consumption: 130 W ● Rated motor time: 15 minutes ● Tip polishing angle: 186° ● Escape angle: 4.5° ● Thinning shape: X type

[Materials/Finish] - Grinding machine body: BS resin - Cutting edge setting device: BS resin - A chuck: BS resin

[Set Contents/Accessories] ●Blade setting device ●A chuck ●Instruction manual

[Caution] ●Do not drop or throw the precision equipment. ●High-speed steel drills cannot be ground.