NISHIGAKI Gakidori Ken Ace with A Chuck

[Features]● After setting the cutting edge, you can grind by simply inserting it into the grinder body. ● X-type thinning polishing is possible.

[Use] ● HSS drill ● Cobalt high-speed steel drill ● Titanium coated drill

[Specifications] Motor speed (rpm): 18500 Polishable size (mm): Straight drill for ironwork 2.6 ~ 13mm / Hexagonal shaft drill for ironwork 7.1 ~ 13mm Width (mm): 120 Depth (mm): 200 ●Height (mm): 173 ●Whetstone material: CBN ●Whetstone dimensions (mm) outer diameter x thickness: 50 x 20 ●Drill tip angle (°): 118 ●Whetstone diameter (mm): 50 ●Grit size (#) : 200 ● Output (W): 95 ● Cutting edge polishing angle (°): 118 ● Power supply (V): AC 100 ● Power cord length (m): 1.8

[Specification 2] ● Grindstone life: about 300 times with a 6.5 mm iron drill ● Power supply: Single-phase 100 V ● Rated motor power consumption: 95 W ● Rated motor time: 15 minutes ● Cord length: 1.8 m

[Materials/Finish] ●Grinding machine body: ABS resin ●Chuck: ABS resin, stainless steel ●Blade setting device: ABS resin

[Set Contents/Accessories] ●Grinding machine ●A chuck ●Blade setting device ●Instruction manual ●Warranty

[Caution] ● Carbide drills and concrete drills cannot be ground.