Canon stamp type marking torque wrench N50MQLK

[Features]
● Marking is done automatically, so there is no need for marking work after tightening.
●Because it is marked on the head of the bolt, it is obvious which bolt you forgot to tighten.
●The socket corresponds to one commercially available deep socket.
●The ink used is oil-based and the mark does not disappear.

[Use]
●To prevent forgetting to tighten bolts.

【specification】
● Torque adjustment range (N・m): 10 to 50
- Insertion angle (mm): 9.53
- Minimum scale (N m): 0.5
- Accuracy: ±3%
- Total length (mm): 257
- Accuracy: ±3%

[Specification 2]
-Square drive 9.53mm
- Corresponding socket (mm): 8 to 24
●Number of markings possible per ink replenishment: 1500 times (socket size 8-13mm), 6000 times (socket size 14-24mm)

[Material/Finish]
● Chrome molybdenum steel (S CM 435)

[Set contents/accessories]
-

【Note】
-