Shrimp Attachment Nutter N17D

[Features] ● Nuts can be easily tightened simply by attaching to your own drill driver. ●M4/M5/M6 nuts made of steel, aluminum, and stainless steel can be fastened.

[Applications] ● For thin plates that are difficult to tap ● For closed cross sections (corners, pipes, aluminum extrusions, and hard-to-reach areas) ● For difficult-to-weld surface-treated steel materials and non-ferrous metals ● For resin products that cannot be welded

[Specifications] ● Overall length (mm): 174 ● Nut usage range: M4, M5, M6 (all materials) ● Grip diameter (mm): maximum 55 ● Clutch maximum memory, torque 6.0N/m only for steel and stainless steel M6 Recommendation. Other than that, use torque equivalent to 4.4N/m (low speed mode)

[Specification 2] No need for troublesome plate thickness adjustment ● Easy and convenient attachment type nut ● With your own 14.4V drill driver, you can fasten shrimp nuts from M4 to M6

[Material/Finish]
-

[Set contents/accessories]
-

[Caution] ●If you are using a drill driver other than 14.4V, please check if it can be crimped properly before installation. ●Drill driver only ●Do not use impact drivers or pneumatic drivers. ●There is a risk of damage to the rivet nut due to the inability to determine whether crimping is complete.