Asahi KASEI Techno ASAHI KASEI Chemical MU Type (Drive-in Type)

[Features]
Just by hammering it in, it exhibits a strong fixing force.
Construction of L-shaped and U-shaped rebars is possible.
Uses a metal wire brush for high adhesion.
Bolts and deformed steel bars to be used can be constructed in any size.
Expiration date: 3 years from date of manufacture

[Use]
Anchoring of concrete blocks.
Soundproof wall installation.
For tunnel construction, etc.
for concrete
Reinforcements for extension and reconstruction, installation of ramps, U-shaped and L-shaped rebars, etc.

【specification】
Outer diameter (mm): 8.0
Overall length (mm): 70
Capacity ([[CM 3]]): 2.9
Bolt used (deformed steel bar): M8, W5/16
Drill diameter (deformed steel bar) (mm): 9.5, 9.5
Drilling depth (mm): 70
Maximum tensile load (kN): 27.4
Long-term allowable tensile load (kN): 6.3
Short-term allowable tensile load (kN): 9.5

[Specification 2]
driving type

[Material/Finish]
Main agent: Epoxy acrylate resin

[Set contents/accessories]
-

【Note】
The allowable tensile load is the calculated value of the bond failure mode when using Fc21N/m [[M2]] deformed steel bar.