THE CUT　Cutter M30 for machining O-ring seals for hydraulic equipment

[Features]
● Vertical burnishing and processing that could only be done with the brazing type have been made standard throwaway.
●The process of sheet processing of each screw, R processing of the upper surface, and spot facing can be consolidated.
● Non-standard sizes and circular machining types are available separately.
●It is a tool that can process the seat surface with high precision at an overwhelmingly lower cost than before.

[Use]
● For processing the seat surface of hydraulic parts.

【specification】
- Outer diameter (mm): 33.5 (d2)
● Guide diameter (mm): 28.5 (d1)
- Total length (mm): 135.0
- Shank diameter (mm): 32 (d)
- L (mm): 135
d (mm): 32
-d2 (mm): 33.5
Chamfering tip: MT-DC1104-12
Dedicated counterbore tip:-

[Specification 2]
-

[Material/Finish]
● Tool steel

[Set contents/accessories]
-

【Note】
●Because there is a risk of damage, please use protective equipment such as covers and safety glasses.
●Be careful not to injure yourself due to scattering or winding of chips.
●Be careful when attaching and detaching the insert tip.