UHT micro spindle MSA-1/8 (1/8 inch collet)

[Features] ● Compact spindle for machine mounting. ●Uses a tuned-up 3BS air motor. ●It is a collet nut specification with a cover. ●Side exhaust with muffler. ●There is no air valve. ●Collet for 1/8 inch. ●Fasten with a two-point flange.

[Use] ●Precision grinding and polishing work with machine mounting.

[Specifications] ● Chuck inner diameter (mm): 3.175 (1/8) ● Air consumption ([M3]]/min): 0.12 to 0.20 ● Hose mounting port: PT1/4 ● Exhaust: side ● Total length (mm) ): 127 No-load rotation speed (rpm): 75000 No-load rotation speed (rpm): 75000

[Specification 2] Working air pressure: 0.4 to 0.6 MPa

[Materials/Finish] Body: Zinc alloy

[Set Contents/Accessories] ●Air hose 1.5m ●Coupling

[Caution] ● Observe the maximum rotation speed of the tip tool. ● If you don't want oil dripping, please install it upwards.