SANWA digital insulation resistance meter 1000V/500V/250V

[Features]● Test rod body storage and protection case integrated. ●Equipped with an auto-hold function that fixes the last measured value. ●Equipped with DC voltage, AC voltage, automatic discrimination function. Compliant with international safety standard CAT.[3] 600V

[Use] ●For measuring the insulation resistance of equipment. ●For insulation resistance measurement of low voltage circuits. ●For measuring the insulation resistance of switchboards.

[Specifications] ● Depth (mm): 57 ● AC voltage (V): 600 ● Height (mm): 170 ● Minimum display (MΩ): 0.001 ● Rated measurement voltage (V/MΩ): 250/4000, 500/ 4000, 1000/4000 - Power supply: AA batteries (R6) x 6 (included) - Width (mm): 142 - Continuous use time: about 150 hours

[Specification 2] ●Protection grade: IP54 (dust and splash proof) ●Conforms to JIS C1302-2002 ●Automatic ACV/DCV detection ●Complies with the CE mark ●Complies with the international safety standard CAT.3.600V

[Material/Finish] Test lead (TL-112a)

[Set contents/accessories] ●Test lead (TL-112a) ●Strap (ST-50) ●Instruction manual ●Test lead TL-112a ●Strap ST-50

[Caution] ● Do not use if the main unit, measurement probe, alligator clip, or ground lead is damaged. ● Do not use in locations where corrosive or explosive gases are present. ●Do not hold the tip of the measurement probe or alligator clip barrier during measurement. ●Connect the ground side (alligator clip) first, and then connect the power side (measurement probe). When disconnecting, separate from the energized side first. ●Do not switch to other functions during measurement.