Ogura portable rebar bender

[Features]
●Completely compatible with SD490 reinforcing bars.
●The bending angle can be set by a dial type, and can be set in any step by using a fine adjustment lever.
●It is possible to isolate the processing part and the structural part and shut out the iron powder.
-Improved the outlet on the back panel to release a lot of iron powder.
●Workability and operability are further improved by using a foot switch. (sold separately)

[Use]
●For bending rebar.

【specification】
-Reinforcing bar diameter SD490: D9 to D25
Bending range: 0-180°
- Bending speed (seconds): 9
- Power supply (A): 14.3
Power consumption (W): 1430
-Voltage (V): 100

[Specification 2]
Power supply: Single-phase 100V
●Power cord length: 3m
- Bending R range: R20 (color axis) to R62.5
- Dimensions: 540 × 466 × 441mm

[Material/Finish]
-

[Set contents/accessories]
●Roller No.B25・425・422・416
●Color No.425・422・419・416・413・525・522・519
●Ground adapter
● Tool box
● [[+]] [[-]] driver
●Hex wrench (2・8・17mm)
- Spanner (17 x 19 mm)
● Waterproof cover

【Note】
-