IS Luster Zinc 3.5Kg

[Features]
●By using zinc flake powder and bright aluminum powder, the bright finish is the closest to the plating color.
●Since it uses epoxy resin, it adheres well to the base material, and can be overcoated, increasing workability.
●It is a 1-liquid type that does not drip when painting and has a short drying time.

[Use]
●Weld marks, cut surfaces, drilling of galvanized steel, zinc sagging, scratches, non-plated areas, etc.
●Alternative to zinc plating for large structures that do not fit in a plating bath or for thin objects that are subject to heat distortion.
● Life-prolonging repair coating of galvanized steel towers, bridges, electrical equipment, etc. that have begun to rust due to aging.
●For long-term rust prevention of steel materials.

【specification】
Color: Bright silver
-Capacity (kg): 3.5
-Operating temperature range (°C): temperature 5°C or higher, humidity 85% or lower

[Specification 2]
Zinc content in dry coating film: 82%
●Drying time: dry to the touch 20 minutes (20℃)
- Coating area: 21.7 square meters (recommended film thickness 80 μm)
Heat-resistant temperature (after application and drying): 180 ° C
●Operating temperature range: Temperature 5℃ or higher (Humidity 85% or lower)

[Material/Finish]
Main ingredients: Zinc dust (flake powder), aluminum powder, epoxy resin, solvent, additives

[Set contents/accessories]
-

【Note】
●Stir well before use until you can confirm that there is no sediment at the bottom of the can.
Please refer to the safety data sheet (SDS) when detailed information is required.