Tsurumi Sweep pump for residual water absorption and drainage 60Hz

[Features] ● Uses Tsurumi's original high-spin type impeller, which is resistant to abrasion and has a structure that is less likely to lock due to sand or mud. ●The check valve of the new siphon breaker mechanism prevents backflow of pumped water and sealing water leakage due to siphon phenomenon when the pump is stopped. ●We have achieved weight reduction by adopting aluminum die-casting and synthetic rubber for the main parts. ● Hose with metal fittings on both sides (suction port side, pump side) for easy connection. ●By covering the bottom plate with synthetic rubber, it absorbs shock to the main unit and prevents damage to the floor. ● Convex bottom shape for easy removal with a plastic HAMMER CASTER during maintenance. ●Electrode automatic type (LSPE type).

[Applications] ● For draining stagnant water from slabs and floors at various construction sites. ●For factory equipment wastewater. ●For drainage of residual water in water receiving tanks and tanks.

[Specifications] ● Discharge rate (L/min): 55 (maximum) ● Total head (m): 7.8 (maximum) ● Frequency (Hz): 60 ● Diameter (mm): 25 x 25 ● Power supply (V): Single Phase 100 ● Current (A): 6.5 ● Output (kW): 0.48 ● Usable water quality: sewage, residual water, pooled water ● Power cord length (m): 5 ● Diameter: 25 mm ● Width (mm): 265 ● Overall length (mm): 300 ● Overall height (mm): 307 ● Control part number: LSPE1.4S-61

[Specification 2] ●Automatic operation type ●Suction hose: 5m ●Maximum degree of vacuum: -73.3kPa (550mmHg) ●Compatible with different voltages from one unit

[Material/Finish] Impeller: Water-resistant special urethane rubber Casing: SBR + SUS304 Suction cover: SUS304 Bottom plate: ADC12 + SBR Suction port: ADC12 Discharge port with handle: ADC12 Out cover: SPCC Shaft seal (mechanical seal): SiC

[Set Contents/Accessories] ●Cabtyre cable ●Suction hose (5m with metal fittings) ●Suction attachment (with liquid level detection electrode) ●φ25mm union hose coupling (for outlet) ●Extension electrode

[Caution] ●Be sure to prime the pump before operation. (about 1.8l)