Tsurumi Sweep pump for residual water absorption and drainage 50Hz

[Features]● The check valve of the new siphon breaker mechanism prevents backflow of pumped water and leakage of seal water due to the siphon phenomenon when the pump is stopped. ●By adopting suction attachment for sweeper, it is possible to absorb standing water in small depressions. ●We have achieved weight reduction by adopting aluminum die-casting and synthetic rubber for the main parts. ●By covering the bottom plate with synthetic rubber, it absorbs shocks to the main unit and prevents damage to the floor. ●By covering the bottom plate with synthetic rubber, it absorbs shock to the main unit and prevents damage to the floor. ● Convex bottom shape for easy removal with a plastic HAMMER CASTER during maintenance. ●Electrode automatic type (LSPE type).

[Applications] ● For draining stagnant water from slabs and floors at various construction sites. ●For factory equipment wastewater. ●For drainage of residual water in water receiving tanks and tanks.

[Specifications] ●Discharge rate (L/min): 50 (maximum) ●Total head (m): 6.9 (maximum) ●Frequency (Hz): 50 ●Aperture (mm): 25 x 25 ●Power supply (V): Single Phase 100 ● Current (A): 6.8 ● Output (kW): 0.48 ● Usable water quality: sewage, residual water, pooled water ● Power cord length (m): 5 ● Diameter: 25 mm ● Width (mm): 265 ● Overall length (mm): 300 ● Overall height (mm): 307 ● Control part number: LSPE1.4S-51

[Specification 2] ●Automatic operation type ●Suction hose: 5m ●Maximum degree of vacuum: -73.3kPa (550mmHg) ●Compatible with different voltages from one unit

[Materials/Finish] Impeller: Water-resistant special urethane rubber Casing: SBR + SUS304 Suction cover: SUS304 Bottom plate: ADC12 + SBR Suction port: ADC12 Discharge port with handle: ADC12 Out cover: SPCC Shaft seal (mechanical seal): SiC

[Set Contents/Accessories] ●Cabtyre cable ●Suction hose (5m with metal fittings) ●Suction attachment (with liquid level detection electrode) ●φ25mm union hose coupling (for outlet) ●Extension electrode

[Caution] ●Be sure to prime the pump before operation. (about 1.8l)