KDS line laser projector 5

[Features]
● Clearly display guidelines with a laser in places where marking is not possible.
●Because there are 3 rotating parts, it is possible to irradiate the line in all directions, up and down, left and right, 360 degrees.
-Because the pedestal is a magnet, it can be easily installed.

[Use]
●As a mark when cutting gypsum boards and wood.
●As a positioning guide when aligning materials.
●For position display when installing a machine.
●On the line for inclined (diagonal) installation.

【specification】
-Irradiation angle (°): 130
-Size (mm): 60 x 55 x 40
●Light source: 635nm red semiconductor laser
- Optical output: 1 mW or less
●Line indication accuracy: ±1mm/5m (linearity)

[Specification 2]
●Adjustment range: 360° vertical and horizontal fine adjustment possible
●Working range (m): 10 maximum (depending on working environment)
Operation time: about 5000 hours
●Operating temperature range: -5°C to +45°C
- Optical output: 1 mW or less

[Material/Finish]
-

[Set contents/accessories]
●AC adapter
● Mounting plate
Hex wrench

【Note】
●Laser class 2 (do not look into the beam)