Pisco tube fitting brass elbow tube 6 screw R1/8 rubber HNBR without cover

[Features] ● In addition to the main body, the release ring is also made of brass, so it has excellent flame resistance and spatter resistance. ●No cover type. ●For use in non-spatter resistant environments (mold cooling water pipes, etc.), we recommend a die without a cover.

[Use]
-

[Specifications] Port size: R1/8 Compatible tube outer diameter D (mm): 6 Width across flats (mm): 12 Fluids used: air, water (conditions apply), thermal oil

[Specification 2] ● Operating temperature range: 0 to 100°C (no freezing) ● Maximum working pressure: 1 MPa ● Working vacuum pressure: -100 kPa

[Materials/Finish] ●Body: Brass + electroless nickel plating ●Seal rubber: Hydrogenated nitrile rubber (HNBR)

[Set contents/accessories]
-

[Caution] ● When using water as the fluid, be sure to observe the following conditions. : 1. When using water, keep the surge pressure below the maximum operating pressure. 2.Be sure to use the insert ring when using water. Failure to use an insert ring may result in joint damage, tube disconnection, or leakage.